Replacement Telsonic 20khz Ultrasonic Plastic Welding Transducer
with 2000w Power
Description:
Ultrasonic transducer is an energy conversion device that converts
high-frequency electrical energy into mechanical energy. In fact,
it is a piezoelectric ceramic whose frequency is the same as its
resonant frequency. It uses the piezoelectric effect of the
material to convert electrical energy into mechanical vibration.
Under normal circumstances, ultrasonic waves are first generated by
an ultrasonic generator, converted into mechanical vibration by an
ultrasonic transducer, and ultrasonic waves are generated by an
ultrasonic derivation device and an ultrasonic receiving device.
Specifications:
| Model | QR-TL20 |
| Frequency | 20 khz |
| Output power | 2000 watt |
| Joint bolt | 1/2-20UNF |
| Ceramic disc Diameter | 50mm |
| Qty of ceramic discs | 4pcs |
| Capacitance | 14000pf |
| Amplitude | 10 um |
| Application | Plastic welding machine |
The physical definition of a wave is that the transmission of
vibration in an object forms a wave. There must be two conditions
for the formation of such waves: one is the source of vibration and
the other is the propagation medium. The classification of waves
generally has the following types: First, classification according
to the direction of vibration and the direction of propagation.
When the direction of vibration is perpendicular to the direction
of propagation, it is called a transverse wave. When the direction
of vibration coincides with the direction of propagation, it is
called a longitudinal wave. Second, according to the frequency
classification, we know that the human ear sensitive hearing range
is 20HZ-20000HZ, so the wave within this range is called sound
wave. Waves below this range are called infrasound waves, and waves
above this range are called ultrasonic waves.
Transducer working mode
Due to different processing methods and requirements, the working
mode of the transducer can be roughly divided into continuous work
(lace machine, CD set machine, zipper machine, metal welding, etc.)
and pulse type work (such as plastic welding machine). Different
working methods The requirements for the transducer are different.
In general, continuous operation has almost no pause time, but the
operating current is not very large, the pulse operation is
intermittent, there is a pause, but the instantaneous current is
very large. On average, the power of both states is large.
Replacement Telsonic 20khz Ultrasonic Plastic Welding Transducer
with 2000w Power
